redivac products in packages

RediVac® means ready for vacuum service, now.

Pure Tech Components is the premier UK distributor for UC Components, Inc. RediVac® line of fasteners, washers, hex nuts, and O-rings. The UC Components, Inc. proprietary RediVac® system ensures that every fastener and seal you order arrives ready to install immediately – saving you time, effort, and money.

The proper handling of hardware and fasteners for your vacuum applications cannot be taken lightly. The value of a cleaned & vacuum-baked O-Ring and a properly vented screw, nut, or washer may seem trivial but their overall performance and savings for you (both in cost and time) can be measured.

Rigorous testing is performed to quantify the value-added benefits of vented hardware and the use of our O-Rings. Through Residual Gas Analysis (RGA) and computerized pump curve plotting with fixed volumes, clean vented hardware, and proper seals have demonstrated a major reduction in pre-process vacuum conditioning.

How does the RediVac® process benefit you and your system?

  • Faster pump-down via greatly reduced surface H2O
  • Enhanced process reliability via greatly reduced hydrocarbon contamination
  • Improved traceability via available full certification with RGA graph
  • Certified Class 100 packaging with nitrogen purge & vacuum seal
  • Cleaning, baking, & packaging performed in ISO Class 5 Cleanroom
  • Seven standard RediVac® finishes available with Vacuum Bake finish: Ag, Au, ENP (Ni), MoS2, WS2, EP, & Precision Cleaned
  • Fasteners available in stainless steel and other base materials, metric, & inch
  • Fasteners available in vented, non-vented, & custom configurations
  • Color-coded labeling system for easy identification

How does the process work?

This proprietary process reduces surface particulates and other contamination by utilizing a multi-stage cleaning, inspecting, and packaging process which is all done inside of our top-of-the-line certified Class 100/ISO Class 5 Cleanroom. 

Step 1: Ultrasonic cleaning process

Step 2: Close inspection

Step 3: State-of-the-art vacuum packaging

By reducing additional vacuum preparation steps, our RediVac® products help you run faster and leaner.

Why choose RediVac® products for your system?

RediVac® Vented Fastener and O-Ring product lines are engineered specifically to help eliminate virtual leaks, improve pump-down times, faster evacuation of vacuum systems, and enhance the overall performance of your high vacuum and ultra-high vacuum systems.

RediVac® vented fasteners

We offer a wide selection of vented screws, nuts, and washers manufactured from a variety of vacuum-compatible materials and are available in a wide range of Inch and metric sizes to meet your needs.

RediVac® precision cleaned & vacuum baked O-Rings

RediVac® O-Rings are available in a wide range of sizes that are manufactured to industry standard AS568 sizes. If you can’t find RediVac® O-Rings in the size or material you need, please contact us directly.

The RediVac® line of cleaned and vacuum-baked fluoroelastomer (FKM) O-Rings is designed to deliver a ready-to-use seal that offers an added level of cleanliness assurance by minimizing residual hydrocarbons and water vapor. Our O-Rings significantly reduce outgassing and residual surface contaminants in your system. Our baking process is designed primarily for the reduction of water vapor and limited volatile organics while not significantly altering the O-Ring hardness.

We are always here to help you!

Pure Tech Components is the premier UK distributor for UC Components, Inc. RediVac® line of fasteners, washers, hex nuts, and O-rings. We provide only the best specialised fasteners to a wide range of industries, including medical, food processing, optical, vacuum, semiconductor, and R&D. Partnering with us gives you the confidence and reassurance you need to concentrate on your customer’s needs without worrying or compromising on cost, quality, or customer service. Contact us today for more information or to place an order.

Leave a Reply

Your email address will not be published. Required fields are marked *